DPA 4161

Description

DPA 4161

DPA d:screet LEGACY 4161 slim omni-directional microphone, loud SPL

If you need to couple complete invisibility with amazing sound, the d:screet slim 4061 omnidirectional microphone, is exactly what you are looking for. This mic is perfect for your film assignment or for any other situation where you need a completely hidden microphone. The d:screet slim 4061 omnidirectional microphone is flat and short with a cable that runs perpendicular to the sound inlet, ensuring easy mounting and a tiny footprint. When used with the detachable button-hole mount or concealer, it becomes completely invisible. With sound on par with DPA’s classic d:screet omnidirectional miniature microphones, you can be sure that the d:screet slim will not disappoint.

Flexible adapter system: the adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won’t hear any loss or change in sound quality.

Features:

pristine audio quality

completely invisible when used with button-hole mount or concealer

adapts to all pro wireless systems

Directional pattern: omnidirectional

Principle of operation: pressure

Cartridge type: pre-polarized condenser

Frequency range: 20Hz to 20kHz

Frequency range, +/-2dB (w. soft boost): 20Hz to 20kHz, 3dB soft boost at 5 to 20kHz

Frequency range, +/-2dB (w. button-hole mount:): 20Hz to 18kHz, 5dB boost at 5 to 18kHz

Sensitivity, nominal, +/-3dB at 1kHz: 6mV/Pa, -44dB re. 1V/Pa

Equivalent noise level, A-weighted: typ. 26dB(A) re. 20uPa (max. 28dB(A))

Equivalent noise level, ITU-R BS.468-4: typ. 38dB (max. 40dB)

S/N ratio (A-weighted), re. 1kHz at 1Pa (94dB SPL): 68dB(A)

Total harmonic distortion (THD): <1% up to 123dB SPL peak, <1% up to 120dB SPL RMS sine

Dynamic range: typ. 97dB

Max. SPL, peak before clipping: 144dB

Output impedance: from microDot = 30 40Ohm, from DAD6001 = 100Ohm

Cable drive capability: 300m with DAD6001-BC XLR adapter

Output balance principle: signal balanced with DAD6001-BC XLR adapter

Common mode rejection ratio (CMRR): >60dB from 50Hz to 15kHz with DAD6001-BC XLR adapter

Power supply (for full performance): for wireless systems = min. 5V max. 50V through DPA adapter, 48V phantom power +/-4V with DAD6001 XLR adapter

Current consumption: typ. 1.5mA (microphone), 3.5mA with DAD6001-BC XLR Adapter

Weight: 8.5g

Cable length: 1.8m

Cable diameter: 1.6mm

Polarity: positively increasing sound pressure produces positive going voltage on HOT connector pin

Temperature range: -40°C to 45°C

Relative humidity (RH): up to 90%