Schoeps TM S 250 C

Description

This 9.84″ TM S 250 C Active Gooseneck for Colette Series from Schoeps features accepted a Colette capsule on the top and a CMC 1 amplifier below. The gooseneck is flexible along its entire 9.84″ length and is able to hold its position once set. It can be used at an ordinary speaking position. The CMC amplifier is then mounted in a TEF table flange.

Features:

Gooseneck table stand

Length 250 mm

Versions with XLR-3M output at the lower end or with 3/8″ socket, or for Colette amplifiers

For CCM -L or CMC 1 L (plus capsule), or for a Colette amplifier on one side and a capsule on the other

The difference between _U und _38:

The __38 version, with its 3/8″ socket, can be directly mounted onto a 3/8″ tap, such as that of the ST 20-3/8 adapter, the T 5 table base, or any STR vertical support rod.

The __U version has an XLR-3M plug directly at its lower end rather than a cable.

The difference between L_ and C:

The L38 and LU versions are for the CCM -L or CMC 1 L plus capsule.

The C version is for a Colette capsule on the top and a CMC amplifier below.

In-table mounting:

Stands that are mounted in-table normally use a TEF table flange. For a 250 mm long in-table stand, the lightweight version TEF-S should be used, or for use with a popscreen, the medium-hard variant TEF-M.

A complete table microphone set could be made up of these items, for example:

B 1 D popscreen

CCM 4-L microphone

TM S 250 L38 gooseneck table stand

ST 20-3/8 thread adapter

TEF-M table flange

_U version: This gooseneck is used at an ordinary speaking position, or, together with the socket end of an XLR cable, anchored in a TEF table flange.

_38 version: This gooseneck is for mounting on a 3/8″ tap. It is used at an ordinary speaking position, or – together with the socket end of an XLR cable, anchored in a TEF table flange.

_C version: An MK microphone capsule is screwed onto one end and a CMC microphone amplifier on the other. The CMC amplifier is then mounted in a TEF table flange.