Tilta Gravity G2X Handheld Gimbal and Nucleus-Nano Bundle

Description

Tilta Gravity G2X Handheld Gimbal and Nucleus-Nano Bundle

The Gravity G2X and Nucleus-Nano Bundle from Tilta combines a handheld gimbal with the Nucleus-Nano Wireless Focus Control System. It provides professional videographers, video journalists, or vloggers with a solution to wirelessly control the camera lens while a camera is mounted on the gimbal. The single-hand gimbal system supports cameras weighing up to 8 pounds, and it has an autocalibrate function which allows the gimbal to tweak its motor settings based on the mounted camera’s properties. The Nucleus-Nano wirelessly controls the focus of most cameras equipped with DSLR, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus handwheel, and the units can connect to each other from up to 300′ away.

Tilta Gravity G2X Handheld Gimbal System with Hard-Sided Case

The Tilta Gravity G2X Handheld Gimbal System is a single-hand gimbal system that features 360° of rotation in both the pitch (tilt) and yaw (pan) axis. It supports cameras weighing up to 8 pounds. An auto-calibrate function allows the gimbal to tweak its motor settings based on the mounted camera’s properties. A downloadable iOS app permits further fine-tuning of the motor settings as well as remote control of individual axes, and wireless time-lapse. Built into the stabilizer is an arm that rides along a rod and mounts to your camera’s cold shoe. This provides additional security and stability when mounting your camera on the gimbal. The 45° angled roll motor clears a rear-mounted LCD, making it easier to see the image on the camera’s LCD.

Four built-in operating modes allow you to adjust the gimbal to best suit the needs of your shot. The gimbal features a quick release handgrip that holds the batteries (not included), allowing you to minimize the size of the gimbal unit. Dual rosettes offer additional mounting possibilities for accessories or handgrips. A built-in micro-USB connector provides 5 VDC power. Without the battery handgrip, you can power the gimbal from a 14.8 VDC power source. The gimbal is made from aluminum and stainless steel, and features a Brazilian rosewood handle. Included with this item is a hard-sided water-resistant case that protects your gimbal during transport and storage.

Auto-Calibration

Once mechanically balanced, the auto-calibration feature senses the camera payload and configures the motors to the match your camera’s configuration.

Bluetooth App

The Tilta Assistant App (currently iOS only) allows you to individually adjust each motor’s torque, dead zone, acceleration, and speed. In addition, the app lets you remotely control the gimbal’s axes and set up a wireless time-lapse mode.

Operation Modes

Pan and tilt (yaw and pitch) follow mode

Tilt lock mode

Fully stabilized mode

Roll lock mode

Each arm features a 7 to 11 cm marking scale, which makes changing cameras or configurations a rapid process, as once you balance a specific camera setup, you can make a note and then reset quickly to match your previous markings.

The handgrip is also the battery holder. No batteries are included with the item, and they must be sourced separately.

Tilta Nucleus-Nano Wireless Focus Hand Wheel Controller

Pair this Nucleus-Nano Wireless Focus Hand Wheel Controller from Tilta with the Nucleus-Nano Motor to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.

The large Hand Wheel responds with no delay as it wirelessly controls the separately available Nucleus-Nano motor from up to 300′ away via 2.4 GHz Wi-Fi, and it lasts up to six hours on a single 3.7V 14500 lithium-ion battery. You can also perform run/stop functions and set hard A and B limits with the buttons on the wheel for more control over your camera and lens.

The Hand Wheel is constructed with aluminum, plastic, rubber, and a sleek rosewood-lined handle for comfort and style. It can mount on a stand, rig, or gimbal such as the Gravity G2X with a rosette connector. One separately available 14500 lithium-ion battery is required to use the Hand Wheel.

Wireless focus wheel for DSLR, mirrorless, or cine-style lenses

Large, rosewood-lined wheel for style and comfort

Connect wirelessly to Nucleus-Nano motor from up to 300′ line-of-sight range via 2.4 GHz Wi-Fi

Powers via separately available 14500 lithium-ion battery for 6-hour operating time

Use start/stop function and set A/B limits with buttons on controller

Connects to rigs, arms, or gimbals with a rosette mount

Compatible with Nucleus-Nano Focus motor

UPC: 709016727146

Tilta Nucleus-Nano Wireless Lens Control Motor

Pair this Nucleus-Nano Lens Control Motor from Tilta with the separately available Nucleus-Nano Focus Hand Wheel or Nucleus-M FIZ unit to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.

The motor comes with a standard 0.8 MOD cine lens gear, operates at up to 1Nm of torque, and can connect wirelessly to the Nucleus-Nano Focus Hand Wheel from up to 300′ away. The motor calibrates to your lens automatically, but you can choose to calibrate manually. You can also perform run/stop functions and set hard A and B limits with the buttons on the Hand Wheel for more control over your camera and lens. The motor is also compatible with the Nucleus-M FIZ hand unit and handgrips.

The motor draws power via a 5-18V micro-USB port from a gimbal or D-Tap battery with a separately available cable. The motor is constructed with aluminum, plastic, and stainless steel for durability. It can mount on a stand, rig, or gimbal with its built-in 15mm rod clamp.