Wisycom MCR54 with 4 x MTP61 Kit

MTP61
Frequency range from 470 to 1260 Mhz, depends on the country (see Configurations)
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user programmable
Switching-window Up to 362 MHz, depending on band (see Configurations)
Frequencies Quartz PLL frequency synthesizer circuit (5 kHz step)
Frequency error ±2.5 ppm, in the rated temperature range
RF Power 10mW/ L10 W/ 20 mW/ L20 mW/ 50 mW/ 100 mW*
*on specific configurations
Antenna connector SSMA
Modulation Wideband and Narrow-band with DSP based digital signal processing
Nominal deviation ±40 kHz Wideband / ±25 kHz Narrowband
Peak deviation ±56 kHz Wideband / ±35 kHz Narrowband
Spurious emissions < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring, compander and modulation control
optional PTT (push to talk) operation
Noise Reduction system ENS – Wisycom ultra-high permorfmance compander
AF bandwidth Audio frequency response (dBa)
in NarrowBand mode (NB): 45 Hz ÷ 17 KHz (3dB)
in WideBand mode (WB): 45 Hz ÷ 20 KHz (3dB)
Distortion < 0.3 % (0.15 % typ.)
SND/D ratio (Analogue) typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connector LEMO 3pin
Audio input level from -40 dBu (12mV RMS) to 6 dBu (1,55Vrms) adjustable in 1 dB steps
input dynamic extension with an integrated limiter
Max input level +6 dBu (1,55Vrms) at clipping
Storage media internal 64 GB micro SD memory card (industrial grade heavy duty)
Time code Linear Timecode decoding
Bit rate 24 bit / 32 bit
Sampling rate 48 kHz
Managing interface Bluetooth 5.2 low energy long range, proprietary waterproof magnetic connector 5 pin (USB HS + power + LTC)
LED 3 RGB LEDs (red, green and blue) for audio, RF, battery status and battery charger
Battery level indication percentage or minute/second
PTT function Pin 3 of AF connector can be controlled via an externall PTT button
Display High contrast OLED white display (128 x 64 pixels)
Power supply Cameron Sino Lithium-ion battery Model CS-BCE10 Part No. CGA-S008E (3.7V, 1050 mAh)
Battery life approx. 8 hours @ 10mW
Temperature range -10 ÷ +55 °C
Dimensions 66,8mm x 47mm x 17mm (HxWxD) without clip
Weight Approx. 72 g. without battery, 94 g. with battery

Frequency ranges MCR54 B1: 470 ÷ 800 + 961÷1000 + 1045÷1075 MHz (UK)
MCR54 B2: 470 ÷ 800 + 823÷832 + 941÷960 MHz (USA/EU)
MCR54 B3: 470 ÷ 800 + 806÷809 + 1240÷1260 MHz (JP)
MCR54 B5: 470 ÷ 800 + 462÷465 + 806÷810 MHz (JP)
Switchable channels 2400 user programmable frequencies, organized in 40 groups of 60 channels
Switching-window up 790 MHz
Frequencies microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step.
The frequencies can be easily PC reprogrammed with USB C or Bluetooth 5 (long range)
Frequency error < ± 2.5 ppm, in the rated temperature range
Modulation FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation ±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity 2 μV ( 6 dBμV, -101 dBm), for SND/N > 58 dB;
in the whole switching-window*
Amplitude response < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
Adjacent chan. selectivity > 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
ENS (for live application)
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 17 kHz (narrowband)
Frequency response ± 1 dB in the 30 Hz ÷ 20 kHz range (wideband),
± 1 dB in the 30 Hz ÷ 17 kHz (narrowband)
Distortion 0.3 % typical
SND/D ratio (Analogue) 120 dB typical*
SND/D ratio (Digital) > 125 dB typical
Audio output Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
Digital sample rate AES3 @ 48 kHz
Monitor output headphone 3.5 mm jack socket
Managing interface USB C, Bluetooth 5 (long range)
LEDs 2 multicolour RGB LEDs to easy indicates Power & Bluetooth
4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
Display OLED 128×64 (white)
Powering – External = 6 ÷ 18 Vdc (3 W max)
– Autonomous. = with optional BCA 54 Battery Module
Power consumption 3 Watt max (with 4 active receivers), 2 Watt max (with 2 active receivers)
Temperature range -10 ÷ +55 °C
Dimensions 104 x 87,6 x 25 mm (H x W x D)
Weight 230g
*RMS value, 22 Hz / 22 kHz, unweighted