Wisycom MTP60

Frequency ranges: from 470 to 1075 Mhz, depends on the country (see Configurations)
Switchable channels: 0 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window: Up to 362 MHz, depending on band (see Configurations)
Frequencies: Quartz PLL frequency synthesizer circuit (5 kHz step)
Frequency error: ±2.5 ppm, in the rated temperature range
RF Power switchable typ. 10mW/L10 W/ 20 mW/ L20 mW / 50 mW /100 mW
note: in some countries high power can be disabled, for local norm!
Antenna connector: LEMO-F 1 pin
Modulation: wideband/narrowband FM, with digital audio conditioning (FPGA)
Nominal deviation: ±40 kHz Wideband / ±25 kHz Narrowband
Peak deviation: ±56 kHz Wideband / ±35 kHz Narrowband
Spurious emissions: < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring
optional PTT (push to talk) operation
Noise Reduction system: ENS – Wisycom Extended-Sound Optimized
AF bandwidth: 45 Hz ÷ 17 KHz (3dB) in NarrowBand mode (NB)
45 Hz ÷ 20 KHz (3dB) in WideBand mode (WB)
Distortion: < 0.3 % (0.15 % typ.)
SND/D ratio: (Analogue) typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connector: LEMO 3pin
Audio input level: from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps
Max input level: +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Storage media: micro SD memory card (.wav files – BWF)
Time code: Linear time code decoding
Bit rate: 16 bit / 24 bit / 32 bit
Sampling rate: 48 kHz
Managing interface: Bluetooth 5 long range, USB-C, IrDA
LED 2 RGB LEDs (red, green and blue) for audio, RF and battery status.
1 LED for recording, 1 LED for battery charger
Battery lifetime indication: percentage or minute/second
PTT function: Pin 3 of the AF connector can be setup to an external push button
Display: High contrast OLED white display (128 x 64 pixels)
Power supply: 2 x AA battery (Alkaline, NiMh or Lithium), MPRLBP lithium (5.55 Wh)
Power consumption: 250mA@ 2.6V average (display off, 100mW power)
Battery life: approx. 10 hours @ 10mW with Alkaline batteries
Temperature range: -10 ÷ +55 °C
Dimensions: 75,7mm x 61,4mm x 19,4mm (HxWxD) without clip
Weight: Approx. 140 g. without batteries (183 g. with lithium batt.)