Zaxcom RX200

Description

Zaxcom RX200 2-channel wideband ENG receiver with 4x AA battery compartment, 512-698 MHz

The RX200 is a 200MHz wide compact battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 27, or 512 to 698MHz, while still filtering out unwanted RF.

The RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It’s is also capable of receiving and outputting the embedded SMPTE time code on a BNC connector also on mic, line or consumer levels.

The RX200 / TRX900CL Camera Link combo is a great solution for sending two channels of 100% digital audio with embedded SMPTE timecode from bag to camera.

FEATURES:

small and light-weight with Zaxcom’s patented side-mounted LED’s, the RX200 is easy to mount on any camera from small format DSLR to a full size ENG rig.

flexibility from afar: RX200 has an automatic tracking front end filter so you can receive on any frequency in any block from 20 through 27 (512-698MHz) with impressive range

self sufficient: the ultra compact RX200 isn’t only small, but powers itself on 4 internal AA batteries for up to 12 hours for use with any camera big or small

going all out: output AES digital or analog audio via a single TA5 connector and timecode from a dedicated BNC connector

Receiver

Receiver RF channels: 1

Diversity method: antenna switching

RF modulation: proprietary digital method

RF frequency range: 518 to 698MHz

RF frequency step: 100KHz

RF signal bandwidth: 200KHz

Channel separation: 500KHz (700KHz recommended)

Sensitivity: -114dBm

Antenna connector: 50Ohm SMA female X 2

Receiver audio – analog output x2

Dynamic range: 116dB

Distortion: 0.002%

Frequency range: 20Hz to 16kHz

DAC Bit-depth: 24bits

Connector: TA-5M

Audio output: Active analog balanced

Audio output level: -35dBm (mic), -10dBm (consumer) or 0dBm (line)

Receiver output

Signal format: AES Balanced

AES dynamic range: 123dB

Frequency range: 20Hz to 16kHz

AES output: AES3 balanced at 96KHz

Audio output connector: TA-5M

Timecode

Timecode output connector: BNC

Timecode output level: 0.01VPP, 0.2VPP, 0.5VVP, 0.9VPP, 1.5VPP

Time code output rate: 23.98, 24, 25, 29.97 ND, 29.97 DF, 30

Power

External power: 6 to 18VDC (140mA @ 12VDC)

Power connector: Switchcraft 760k

Internal power: 4 AA Batteries

Li-Ion battery life: Up to 12 hours

NiMH battery life: Up to 8.5 hours

Alkaline battery life: Up to 7 hours

Misc.

Serial control port: RS422

Weight: 3492.6grs (without internal batteries)

Dimensions: 25 x 89 x 89 in mm

Display: graphic white OLED pan