Zaxcom TRXCL3

Description

Zaxcom TRXCL3 wideband dual channel camera link transceiver with internal recording

Deliver pristine audio quality with the TRXCL3 wide-band camera link transmitter for sound professionals in film, television or ENG applications. Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.

The TRXCL3 is designed to limit intermodulation which can occur when multiple transmitters are in close proximity to each other and mix together. The TRXCL3 sends audio with embedded timecode to camera via a UHF signal to QRX200, RX200 and QRX235 receivers or through ZaxNet’s 2.4 GHz signal to an ERX3TCD receiver. A TA5 audio input offers balanced stereo line level or sample rate converting AES. The 3.5mm output delivers audio and the BNC connector provides timecode in- and output. The TRXCL3 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private.

ZaxNet allows you to send or receive timecode, scratch track audio and remote control commands. Zaxcom High Density (ZHD) modulation increases the number of available channels in the wireless spectrum.

FEATURES:

digital modulation

encrypted audio

intermodulation resistant

internal recording

MARF: Mobile Audio Recording Format

timecode

ZaxNet

ZaxNet Remote

ZHD Modulation

TRANSMITTER

RF Modulation: Proprietary Digital Method

TRXCL3.5 RF Frequency Range: 512-614 MHz

TRXCL3.6 RF Frequency Range: 596-698 MHz

RF Frequency Step: 100 KHz

RF Bandwidth in ZHD Mode: 50 KHz

RF Bandwidth: 200 KHz

Channel Separation in ZHD Mode: as close as 100 KHz (receiver dependent)

Channel Separation in XR Mode: 400 KHz

Antenna Connector: 50 Ohm SMA Female

Emission Designator: 180 KV2E

FCC Part: 74.861

TRANSMITTER AUDIO

Dynamic Range: 114 dB

Distortion: 0.002%

Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz

System Group Delay: 3.5 ms

Audio input connector TA5 male

Analog Input Range: -10 to +4 dBu

Analog input type balanced line level

Audio input Impedance: 4.7 k Ohm

ADC Bit-Depth: 24 Bits

ADC Sampling-Rate: 48 kHz

AES input Balanced with sample rate conversion

Sample rate range 32 Khz to 96 Khz

TIMECODE READER / GENERATOR

Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)

Timecode Type: SMPTE

Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

INTERNAL RECORDING

Media: MicroSD Card (Flash Memory)

File Format: .ZAX

Recording Time: 96 Hours (16 GB Card)

2.4 GHZ ZAXNET TRANSCEIVER

RF Frequency Range: 2.403 to 2.475 GHz

RF Modulation: Digital Spread Spectrum

RF Frequency Step: 0.001 GHz (1 MHz)

RF Bandwidth: 1 MHz

Channel Separation: 2 MHz

Sensitivity: -96 dBm

PHYSICAL / POWER

Weight: 198 gr

Dimensions (H x W x D): 2.54 x 9 x 8.2

Display: Graphic OLED

Power Output: 25 / 50 / 100 mW Software Selectable

Power consumption: 2.13 watts